商品详情
开具电子发票,如需发票请在提交订单时备注里填写:
发票抬头:********
统一社会信用代码:**************
联系邮箱:*****@***
预计11月发货。
目录
1 比萨斜塔主要资料
1.1 1999年以前的一般情况
1. 2 地质状况
1.3 加固情况
2 引言
3 外群桩基方案
3.1 外群桩基础、圆形地下室和双向空间结构体系
3.1.1 外群桩基础(见LT-13和LT-32)
3.1.2 混凝土圆形地下室
3.1.3 双向空间结构体系
3.2 两次基础置换前的准备工作
3.2.1 冻土前应采取加固塔身的措施
3.2.2 确定第一位置的地下室和塔基第一中心
3.2.3 AGF工程
3.3 AGF过程分析
3.3.1 AGF区的分类及其功能
3.3.2 GFUs的分类
3.3.3 水平层GFUs的特性
3.3.4 AGF设计
3.3.5 冻胀力对基础的影响
3.3.6塔的位置
3.4 采取技术措施以完成AGF工程
3.4.1 建立水平半圆形 GUS e、f、h、j(见LT-6),垂直环形 GUS a、b、c,d(见LT6)和垂直扇形 GFUs e'、f'、g'(见LT-40)
3.4.2 建立水平半圆形层 GFUs e1~e4,f1~f4,h1~h4,j1~j6和水平圆形层GFUg
3.4.3 “全封闭水平冻结加固技术”在AGF中的应用
3.4.4 确定第一个水平半圆形层GFUs中冻结孔的方向
3.4.5 设计TEUs(隧道开挖单元)
3.4.6 液态氮管路的两种连接系统
3.5 减少土冻胀力对塔基的彩响
3.5.1 间歇冻结法在AGF中的应用
3.5.2 可控技术在施工中的应用
3.5.3 外部有效应力的概念在AGF的应用
3.5.4 较快冻结土
3.5.5 以低温冻结土层
3.5.6 构架全封闭的防水屏障
3.5.7 在塔基下设置一层未冻地基层
3.6 塔基下TEUs作业和第一次基础置换
3.7 第二次基础置换
3.8 提升系统
3.8.1 提升和转动斜塔的必要性
3.8.2 “交点”的概念
3.8.3 两种提升系统
3.8.4 三个提升步骤
3.9 对桩基及其承台作进一步分析
3.9.1 群桩基设计
3.9.2 设计两种环形R.C.桩承台
3.10 对地下室结构作进一步分析
3.10.1 地下室结构承重特征的变化
3.10.2 对地下室结构设计的补充
3.11 对双向空间结构体系作进一步分析
3.12 设计混凝土基础隔震层和混凝土内筒结构
4 公式的推导
5 结语
5.1 本外群桩方案包括以下八个工程项目
5.2 仿建新斜塔的方案
6 参考资料
7 总附录
作者简介
孔繁曦,1931年7月生。1953年毕业于浙江大学土木工程系结构专业本科。国家一级注册结构工程师,高级工程师。在各设计单位从事设计工作60多年,包括: (1)大中型冶金工业建筑结构设计; (2)设计并审查60多万平方米的大中型公共民用建筑结构。
工作经历
1954年1月~1958年9月青岛理工大学,教师;
1958年10月~1972年10月山东冶金工业设计院,技术员, 结构设计;
1972年11月~1982年12月冶金部鲁中冶金矿山总公司设计处,工程师,从事科研及结构设计;
1985年6月~1994年6月青岛公用事业设计院,高工,总工程师;
1994年7月~2002年3月青岛西海岸建筑设计院,高工,总工程师,高级技术顾问;
1979年 被聘为冶金部鲁中冶金矿山总公司技术评委会评委委员;
1992年9月 被聘为青岛市优秀工程勘察设计评选委员;
2002年3月 被聘为青岛建筑施工图设计审查中心审查工程师。
获奖经历
1983年5月 长篇论文《薄壁箱型井塔结构强度与稳定性的实验研究》主要作者之一,获山东省自然科学优秀学术论文二等奖。
1987年12月 长篇论文《井塔楼壁板强度与稳定计算》主要作者之一,获山东省优秀学术论文科学技术进步奖二等奖。
1989年 获“青岛市优秀科技工作者”称号(结构专业名额仅一名)。
The Introduction of Author
Kong Fanxi (Robert. Kong) Born in July 1931,the author was graduated from Zhejiang University P.R.C. in 1953. Majoring in building structure in civil engineering, undergraduate. National 1st class registered structural engineer;Senior engineer.
Working Esperience
Engaged in design work in design institutes for more than 50 years including (1) structural design for metallurgy industry building for over 10 factories with large and medium scale. (2) Structural design and examined design drawings for public, civil buildings with large and medium scale for more than 600 thousands square meters (building area).
1954.1~1958.9 Qingdao University of Science and Engineering, teacher.
1958.10~1972.10 Shandong Metallurgy Industry Design Institute, Technician, engaged in structural design.
1972.11~1982.11 Design Department in Luzhong Metallurgy Company in Metallurgy ministry, engineer, engaged in scientific research and structural design.
1985.6~1994.6 Qingdao Public Utility Architectural Design Institute, senior engineer, engineer in chief, National 1st class registered structural engineer.
1994.7~2002.3 Qingdao Xihian Architectural design Institute, Senior engineer, engineer in chief and senior consultant of engineering, National 1st class registered structural engineer.
1979 Invited as committee member of the technical judging panel in Luzhong Metallurgy Company, Metallurgy Ministry
1992.9 Invited as committee member of Qingdao municipal excellent design judging panel;
2002.3 Invited as examination engineer in Qingdao architectural design examination and verified center;
1983.5 A long thesis was awarded by Shandong province with the second class price of excellent scientific academic theses; One of the main authors.
1987.12 A long thesis was rewarded by Shandong province with the second class price of excellent scientific and technology articles; One of the main authors
1989 Awarded by Qingdao municipal as superior designer in scientific and technology (for structural specialty, only one technician in Qingdao municipal).
- 建工社中国建筑书店 (微信公众号认证)
- 国内版书刊零售、本版图书批发
- 扫描二维码,访问我们的微信店铺
- 随时随地的购物、客服咨询、查询订单和物流...