Thermal Safety of Chemical Processes: Risk Assessment and Process Design, 2nd Edition

基本信息

作者: Francis Stoessel

Hardback: 574页

出版社: John Wiley (2020年4月1日)

语种: 英语

ISBN: 9783527339211                                                

产品尺寸及重量: 250 x 172 x 31 (mm) | 1210g

页面参数仅供参考，具体以实物为准

书籍简介

为了反映当前的IUPAC标准，第二版进行了彻底的修订和更新，增加了五个新的章节，涉及能源潜力评估、物理单元操作、紧急减压、降低风险措施的可靠性、过程安全和过程开发。第一部分是热风险评估的一般介绍，介绍了热风险评估的理论、方法和实验方面。第二部分致力于所期望的反应和技术，使反应能够在工业规模上被掌握，而第三部分处理二次反应，它们的特征，和避免触发它们的技术。

由于列入了新的内容和改组措施，减少风险的技术方面在构成最后部分的新一节中得到强调。每一章的开头都是一个案例，说明了这个话题，并说明了从该事件中学到的教训。本文分析了大量来自工业实践的例子，每章结尾都有一系列的练习或案例研究，让读者检查自己对主题的理解程度。

Completely revised and updated to reflect the current IUPAC standards, this second edition is enlarged by five new chapters dealing with the assessment of energy potential, physical unit operations, emergency pressure relief, the reliability of risk reducing measures, and process safety and process development. Clearly structured in four parts, the first provides a general introduction and presents the theoretical, methodological and experimental aspects of thermal risk assessment. Part II is devoted to desired reactions and techniques allowing reactions to be mastered on an industrial scale, while the third part deals with secondary reactions, their characterization, and techniques to avoid triggering them.

Due to the inclusion of new content and restructuring measures, the technical aspects of risk reduction are highlighted in the new section that constitutes the final part. Each chapter begins with a case history illustrating the topic in question, presenting lessons learned from the incident. Numerous examples taken from industrial practice are analyzed, and each chapter concludes with a series of exercises or case studies, allowing readers to check their understanding of the subject matter.

Finally, additional control questions have been added and solutions to the exercises and problems can now be found.

作者简介

弗朗西斯·施特塞尔（Francis Stoessel）教授是瑞士工艺安全公司化工过程安全咨询的负责人。他从阿尔萨斯高等大学化学工程专业毕业后，大部分时间都在Ciba-Geigy的化学工程系工作。他曾是汽巴热安全部门的负责人，后来又在诺华担任工艺安全咨询部门的负责人。之后，他在洛桑的瑞士联邦理工学院担任教授。

施托塞尔教授曾获瑞士化学工业安全专家委员会及瑞士热分析和量热学会颁发奖项。

Professor Francis Stoessel is Head of Chemical Process Safety Consulting in the Swissi Process Safety GmbH. After graduating in Chemical Engineering from the Universite de Haute Alsace, he spent most of his career working for Ciba-Geigy in their Chemical Engineering Department. He was Head of the Thermal Safety Department at Ciba, later of Process Safety Consulting at Novartis. He then took up a professorship at the Swiss Federal Institute of Technology at Lausanne. Prof. Stoessel has received awards from the Swiss Expert Commission for Safety in the Chemical Industry and the Swiss Society for Thermal Analysis and Calorimetry.